Contact me immediately if you encounter problems!

All Categories

Custom 350ml PET Lotion Pump Bottle | Flat Rectangular Bottle, 99mm Body, Translucent Tinted or Custom Colour, Screw Mouth for Pump or Cap | OEM Shampoo, Hand Wash & Cleanser Packaging

📦 N123 Series: 350 ml Flat Rectangular PET Bottle with Screw Mouth and Lotion Pump, for Shampoo, Hand Wash and Cleansers

🌟 Product Highlights

• 🧪 100% One-Stop Integrated Solution: From the bottle and the pump to the label, the box, and the outer carton — our factory delivers the complete package from a single production line. Eliminate fitment risks and multi-vendor coordination headaches: one supplier, one QC standard, one seamless handover. Because the same house supplies the bottle, the pump, the label, and the box, the pump is matched to the screw mouth and the label is dimensioned for the actual flat panel — one purchase order instead of several suppliers.

• 📏 A Flat Section at a Mainstream Volume: 350 ml is one of the most common retail sizes in body and hair care, and this bottle holds it in a flat, rounded-rectangle section rather than a cylinder. The result is a bottle that stands on a narrow ledge, packs tightly into a case or a travel bag, and presents a flat face to the customer instead of a curved highlight.

• 🖼️ Two Large Flat Panels: The front and back are genuinely flat, so a 350 ml product gets a labelling surface that would normally belong to a bigger bottle. A label lies down on a flat panel without conforming to a curve, the copy stays square to the edges, and the layout keeps its proportions in a photograph — which is what makes a mid-size bottle look deliberate on a listing page.

• 🔩 Screw Mouth — Pump or Cap, Your Choice: The image set shows the pump as a separate part being fitted to a threaded mouth. That is the flexibility that decides a product's channel: a lotion pump for retail and bathroom use, or a plain screw cap for travel, amenity and gift formats where a pump can be pressed in transit and a sealed cap is the safer answer. One bottle covers both, so a brand can offer a pumped version and a capped travel version without a second tool.

• 💧 Translucent Tint — The Formula Sells Itself: The sample is a translucent tinted blue, so the wall, the fill level and the product's own colour are all visible. In body care and cleansing this is a merchandising asset: a tinted gel, a pearlescent wash or a clear micellar water reads as a colour block on the shelf, and the customer can see how much is left. A translucent wall also makes the bottle look lighter and cleaner than an opaque one at the same volume.

• 🎛️ Black Pump as the Contrast: The sample pairs a translucent tinted body with a black pump and collar — a hard, neutral element against a light, glowing one. It reads modern and graphic, and it means the bottle needs no second colour in the artwork to look finished.

• 🧱 The Squared Shoulder: Where the neck meets the body the shoulder steps through a squared transition rather than a long dome. On a flat bottle this matters: a square shoulder keeps the front panel's full height available for the label and gives the silhouette a crisp, architectural edge instead of a soft bulge.

• 🥣 A Dished Base, Not a Flat One: Look at the bottom from underneath and the base is recessed, with a flat outer rim and an inner dished centre. This is PET engineering rather than styling: the recess resists the base bulging under internal pressure, it lets the bottle stand flat and square on a wet shelf, and it adds rigidity to a panel that would otherwise flex. It is one of the details that separates a bottle that behaves from one that wobbles.

• 🍶 350 ml — The Size That Carries a Range: 350 ml sits at the centre of body and hair care: the shampoo, body wash, hand wash and cleanser size that a customer buys as their main product, and the size that a travel, gift or trial format is measured against. It is large enough to be economical and small enough to hold and press comfortably with one hand.

• 🎨 Any Colour, Any Finish: The tinted blue version shown is one specification. The bottle can be produced in any opaque colour, a translucent tint, or a frosted, matte, gloss or metallic finish, matched to your reference sample, with the pump and the cap specified separately so a range can be colour-coded by variant or unified under one house colour.

• 🧩 Custom Size, Colour, Closure and Decoration: Every element is a variable: the capacity and section, the bottle colour and finish, the pump type and output, the cap type, the neck finish, and the decoration method. The 350 ml version shown is one specification in the range.

• 📐 Published Callouts Shown on the Sample: The image set calls out a 99 mm bottle height on a 350 ML nominal fill, and prints a single base callout of 66 mm. Those are the dimensions we produce to when they are the brief — and any other capacity or proportion is produced to your specification.

🎨 Appearance & Aesthetic Design: A Flat Vessel With a Squared Shoulder

The N123 Series is designed for brands whose packaging should look clean, light and deliberate at a mainstream volume.

• The Silhouette Reads Light, Not Bulky: At 350 ml a round bottle starts to look like a bulk item. A flat section with generous corner radii reads lighter and more designed — the same fill in a shape that looks considered rather than industrial, which is why flat bottles dominate travel, gift and premium body-care ranges.

• The Corner Radius Is the Design: The corners are radiused generously, so the bottle reads soft and premium in the hand — closer to a piece of soap than a box. Radiused tightly, the same section reads cheap and industrial. Consistency between the four corners is what holds that impression across a whole case.

• Straight Panels, Full Height: With a squared shoulder rather than a long dome, the flat front panel runs almost the full height of the bottle. That gives the layout a tall, clean rectangle to work with — a mark at the top, a product name in the centre, a short panel at the base — instead of a shape that tapers into the copy.

• Translucent Against Black: The tinted wall glows and the black pump anchors it. The contrast is what makes a simple two-part pack look resolved: one light element, one hard element, nothing else competing.

• The Base as a Visible Detail: The dished base is not usually seen, but it is felt — it is what keeps the bottle standing square when it is nearly full and being pressed one-handed. On a translucent bottle it is also faintly visible through the product, which is a small quality signal at the bottom of the pack.

• On the Sample Artwork: The sample carries the FANNuo mark with a monogram and the line "SYSTEM FOR SKIN CARE", used to demonstrate print registration and layout on a flat translucent panel. Any mark, icon, or copy on the final pack is the brand's own and is produced to the brand's artwork.

🛠️ Technical Specifications

Precision-engineered for PET moulding, screw-mouth fitment, and high-volume filling lines.

Specification | Details

Product Type | 350 ml PET Bottle — Flat Rounded-Rectangle Bottle with Screw Mouth, Supplied with a Lotion Pump or a Screw Cap Capacity | 350 ML Nominal as Shown; Fill Level, Overflow Capacity and Recommended Headspace Confirmed on Sampling Bottle Height | 99 mm as Called Out on the Sample (Bottle Only; Total Height With the Pump Fitted Depends on the Pump Selected) Base Dimension Called Out | 66 mm as Printed on the Sample — the Sample Carries a Single Base Callout; Confirm Which Axis (Width or Depth) Before Publishing This Specification Section | Flat Rounded Rectangle; Final Width and Depth Confirmed Against Your Drawing or Sample Material (Bottle) | PET as Stated on the Sample Material (Pump) | Specified per Project Against the Pump Option Selected Bottle Colour & Finish | Translucent Tinted Blue as Shown; Any Opaque or Translucent Colour, Gloss, Matte, Frosted, Satin or Metallic Finish Matched to Your Reference Closure Options | Lotion Pump as Shown; Screw Cap and Further Dispensing Options Available on the Same Mouth Pump Colour | Black Head and Collar as Shown; Any Colour and Finish per Specification Output per Stroke | Specified per Project — Confirmed Against Your Formula and the Pump Selected Neck Finish | Specified to the Pump or Cap Selected; Confirmed by Physical Fit Test on Sampling Base | Dished (Recessed) Base as Shown, With Flat Outer Rim Dip Tube | Trimmed to the Bottle Base per Project Decoration | Pressure-Sensitive Label, Shrink Sleeve, Full-Wrap Label or Direct Print on the Flat Faces Custom Capacity & Size | Further Capacities, Heights and Sections Produced to Your Specification Custom Content | Brand Mark, Product Name, Variant Coding, Ingredient and Usage Panels, Barcode or QR, Batch and Date Fields, Multi-Language and Origin Copy MOQ | To be confirmed per project — confirm with your account manager Sampling | Pre-Production Sample Supplied for Approval Compliance Documents | To be confirmed per project and destination market

• Note: The 99 mm callout describes the bottle body; the total height with a pump fitted is greater and depends on the pump selected, and the working fill level is set with the dip tube length — both confirmed on sampling. The 66 mm figure is the only base dimension printed on the sample and its axis is not stated there, so it is shown here as a base callout rather than as a width or a depth; please confirm the axis, or send a drawing, and the specification will be written with both section dimensions. The material breakdown of the pump shown is not published on this sample, so the pump material is specified per project rather than assumed. On a shallow flat bottle the dip tube and the last few millilitres matter proportionally more, so priming and low-fill draw-off are verified on samples. Artwork, marks, and copy shown are samples only and are replaced by your own.

🌈 Full Customization & OEM/ODM Services

Every element of this bottle is a specification you control — the samples are a demonstration, not a fixed product.

• Custom Closure: Lotion pump as shown, a plain screw cap, a disk-top, a flip-top, or a foaming pump on the same screw mouth — with output per stroke set against your formula and your intended dose. Where a brand needs both a pumped retail product and a capped travel product, one bottle covers both.

• Custom Colour and Finish: Any opaque or translucent colour, in gloss, matte, frosted, satin, soft-touch or metallic, matched to your reference sample. Because the wall is translucent, we ask for the formula colour alongside the bottle colour and specify the two together.

• Custom Capacity and Section: 350 ml as shown, plus other capacities on the same flat language — a 200 ml travel size and a 500 ml family size in the same silhouette, so a range reads as one family with one label format and one pump specification.

• Custom Label, Sleeve and Print: Pressure-sensitive label, shrink sleeve, full-wrap label, or direct print. On a flat bottle we set the wrap seam onto a narrow side rather than the front face, so the seam never crosses the brand panel — a detail decided at artwork stage and hard to fix later.

• Custom Neck Finish: Set to the pump or cap you have qualified, confirmed by physical fit test before production rather than by drawing alone, which is also what allows a brand to fit its own pump or cap to our bottle.

• Custom Carton, Insert and Bundle: Order the bottle with its label, its box, its insert, and its outer carton from the same house, so the label is cut for the actual flat panel and the insert is cut for the actual section — a flat profile nests into a die-cut tray with almost no wasted space.

• MOQ and Range Economics: Minimums are quoted per project, depending on capacity, colour, closure, and decoration. Where a range shares one bottle mould across several colours or closures, ask your account manager how the quantities are counted.

🧴 Core Applications: The Specific Skincare Products This Bottle Is Built For

A 350 ml flat bottle with a screw mouth and a choice of pump or cap is a mainstream retail dispensing format. The products below are the ones this exact specification — 350 ml, flat section, pump or cap, tinted or opaque wall — is built for most often.

• Shampoo — Primary Application: 350 ml is a core retail shampoo size in many markets. The pump makes a mid-size bottle usable at the basin, the flat section packs densely, and the flat panel carries a full ingredient and usage panel without crowding.

• Conditioner and Hair Treatment: The paired product in the same silhouette — same bottle, same pump, a different label — which is how a shampoo and conditioner pair is built from one mould.

• Body Wash and Shower Gel: The mainstream 350 ml shower format, where a translucent tinted wall lets the gel's colour sell the product on the shelf and a flat bottle grips well with wet hands.

• Hand Wash and Liquid Hand Soap: 350 ml is a standard premium hand-wash size, sitting on a basin ledge where a round bottle would be a tight fit. A screw-cap version covers travel and guest formats.

• Hand Lotion and Hand Cream: A mid-size pump bottle for basins, desks and hospitality, where the flat profile fits a narrow ledge.

• Cleansing Water, Micellar Water and Makeup Remover: A thin, water-light liquid where the pump, the dip tube and the fill level must be specified together so the pump primes and draws cleanly to the last millilitres — a specific concern on a shallow bottle.

• Cleansing Milk, Cleansing Lotion and Cleansing Oil: Rinse-off and oil cleansers dispense well from a pump, and a 350 ml fill is the practical working size for daily use.

• Toner and Lotion: A pump-dispensed toner or lotion at a mainstream volume, where the translucent wall shows the liquid's clarity and any natural sediment.

• Body Lotion and Body Milk: A mid-size pump bottle for body care, where a measured dose per press is part of the product experience.

• Gel Cleanser and Gel Wash: A flat 350 ml bottle for a gel cleanser, carrying a full panel of copy on its flat faces.

• Foaming Cleanser and Cleansing Foam: A foaming pump on the same screw mouth converts the fill into a mousse cleanser — a concentrate-style format at a mainstream size.

• Baby Wash, Baby Shampoo and Baby Lotion: A break-resistant PET bottle at a family and travel-friendly size, where glass is rarely acceptable.

• Scalp Care, Hair Tonic and Scalp Lotion: Pump formats for scalp treatments, where a targeted nozzle suits repeat use.

• Sun Care, After-Sun and Body Care: Mid-size pump formats sold alongside a larger size or inside a seasonal set.

• Hotel, Amenity and Travel Formats: A 350 ml piece for amenity programmes and travel kits, where the flat section packs tightly into an amenity tray or case and a screw cap is the transport-safe choice.

• Gift Sets, Discovery Sets and Gift-with-Purchase: A 350 ml piece inside a rigid box or a set, where the flat profile sits cleanly in a die-cut insert with minimal void fill.

• Dog and Pet Shampoo — Adjacent: The same bottle and pump family, a growing adjacent use and a natural second line for a brand already running this format.

• Household and Home-Care Liquids — Adjacent: Pump formats for body-adjacent liquids, where a flat section and a mainstream volume are the buying criteria.

💎 Why Choose Us as Your Custom Bottle Supplier?

• Flat Panel Quality on a Thin Section: A flat panel on a moulded bottle can bow, sink or show flow lines where a curved wall hides them. We control the parison, the blow-up and the cooling so the flat face reads even and true — that face is where the label sits and where a defect is seen first.

• Panel Stiffness Under a One-Handed Press: A large flat panel flexes when the bottle is pumped with one hand — the "oil-can" effect — and a panel that flexes feels thin, can lift a label and can make the bottle unstable on the shelf. The base geometry and the wall are specified together against that behaviour, and verified on filled samples.

• Dished Base Flatness: The recessed base is what keeps the bottle standing square and stable. We check the flatness of the outer rim and the concentricity of the recess, because a base that is off shows up immediately as a rock or a lean on the shelf.

• Translucent Tint Consistency: On a tinted translucent wall, wall-thickness variation reads as banding through the product, and colour drift between runs is obvious against the previous order and against a paired SKU. We hold wall consistency and colour to an approved reference sample.

• Corner Radius Consistency: The corner radius on a soft-cornered flat bottle is the design, and any variation between the four corners is visible in the hand and in a photograph. We hold the radius and the corner wall across the run so a case looks like one product.

• Screw Mouth Thread and Seal: Because the mouth is threaded and the closure is a separate part, thread fit is what decides whether the pack leaks in transit or weeps at the collar. We fit-test the pump or cap on the actual bottle and check seal integrity on filled units.

• Pump Output, Priming and Low-Fill Draw-Off: A shallow bottle holds less product above the dip tube, so the last few millilitres matter more than on a large size. We verify priming, output consistency and how much remains when the pump stops drawing, and trim the dip tube to suit.

• Label Seam Placement: On a wrap label the seam is the first thing to go wrong — landing across the brand panel or lifting at a corner. We plan the seam onto a narrow side and specify the substrate and application window against the actual bottle section.

• Weight, Breakage and Freight Economics: PET gives a light, break-resistant pack for retail and travel channels, and a flat section packs more units per carton than a round bottle of the same fill. We help specify a wall and weight that hold shape and stability while keeping landed cost where a mid-size line needs it.

• Physical Sample Before Production: Every project is approved on a pre-production sample, so the section, corner radius, panel quality, colour, closure fit, output, dip tube, base flatness, and decoration are all confirmed on a real filled unit before mass production.

• One-Stop Bundle, One Quality Standard: Supplying the bottle, pump, cap, label, and box from the same house removes the most common failure in this category — a closure or a label dimensioned for a bottle produced to a slightly different tolerance, which is what causes line stoppages and returns.

• 10+ Years of Cosmetic Packaging Expertise: Backed by 1,000+ mature mould sets and ISO9001 quality management, we have delivered integrated packaging solutions for over 10,000 global beauty brands — and the same engineering discipline is applied to the bottle, pump, and decoration programme.

N123详情页_01.jpgN123详情页_02.jpgN123详情页_03.jpgN123详情页_04.jpgN123详情页_05.jpg

Get a Free Quote

Our representative will contact you soon.
Email
WhatsApp
Company Name
Leave a message
0/1000
  • YES! Please send your logo in CDR format to us. MOQ is 10000pcs.(depend on bottle designs).
  • Yes, labels can be made.
  • . Silk printing, hot-stamping, UV Coating,Spray-coating. b.Custom body / caps color . c.Open mould service.
  • Samples usually take 7-10 days (if inventory is sufficient), custom designs normal 25-35 days (depend on your designs and bottle material).
  • Usually 5-7days by express. 30-35days by sea if big quantity.
  • MSDS + SGS +ISO
  • 2times quality checking by QC before shipping. (On production line+ packing team checking).
  • Packing process will be send to you before shipping for confirmation.
  • Via Alipay, western union, TT, Paypal.
  • Yes, but shipping cost need be repaied.
  • YES, MOQ is depend on cap designs.
  • Welcome any time, our factory is Guangzhou baiyun area.

Get a Free Quote

Our representative will contact you soon.
Email
WhatsApp
Company Name
Leave a message
0/1000
WhatsApp QR code for Qiyue Industry
custom 350ml pet lotion pump bottle  flat rectangular bottle 99mm body translucent tinted or custom colour screw mouth for pump or cap  oem shampoo hand wash  cleanser packaging-8

Get a Free Quote

Our representative will contact you soon.
Email
WhatsApp
Company Name
Leave a message
0/1000