📦 N118 Series: 780 ml Square PET Pump Bottle with Sculpted Diagonal Ribbing and Stepped Shoulder, for Shampoo, Body Wash and Refill
🌟 Product Highlights
• 🧪 100% One-Stop Integrated Solution: From the bottle and the pump to the label, the box, and the outer carton — our factory delivers the complete package from a single production line. Eliminate fitment risks and multi-vendor coordination headaches: one supplier, one QC standard, one seamless handover. Because the same house supplies the bottle, the pump, the label, and the box, the pump is matched to the neck and the label is dimensioned for the actual face — one purchase order instead of several suppliers.
• ⬛ A Square Section Packs at Full Density: The section is 69.2 mm by 69.2 mm — a true square. Round bottles touch at a single point and waste the space around them; square bottles meet face to face, so the carton, the pallet and the shelf facing are filled with product rather than with air. At 780 ml, where a single case is large and freight is a real line in the cost sheet, that packing efficiency is worth more than a marginal difference in unit price — and on-shelf it means more facings in the same width.
• 🗂️ Four Flat Faces Instead of One: A square bottle gives four equal flat panels — front, back, and both sides. For a 780 ml product that is a copy advantage, not just a shape: a full ingredient list, a usage guide, a bilingual panel, a brand story and a barcode can all sit on genuinely flat, readable surfaces without a wrap-around label fighting a curve. On a square bottle, the layout has room to breathe.
• 🍶 780 ml — The Value Size That Does Not Look Like a Value Size: 780 ml is the bulk and refill tier: the family shampoo, the salon and back-bar size, the refill for a paired dispenser, and the amenity and professional volume. It is the size with the lowest cost per millilitre for the customer — and because of the sculpted ribbing and the stepped shoulder, it is also a bottle that can carry a premium price and look like the hero of the shelf rather than the economy option at the bottom of it.
• 🌊 Sculpted Diagonal Ribbing — Identity, Grip and Structure in One: The flowing diagonal ribs on the front and side faces are the bottle's signature. They read as carved, liquid and sculptural, they give a 780 ml bottle a genuine grip surface when hands are wet, and they act as stiffening ribs across a large flat panel. That last point is engineering, not styling: a big flat PET panel flexes and "oil-cans" under a one-handed press, and these ribs are what stop it.
• 💠 The Stepped Shoulder: Below the neck the shoulder is built as a stack of terraced rings. It is a small moulding detail with a large effect — it carries the eye from the narrow neck to the wide body, it hides the shoulder transition that usually looks unresolved on a square bottle, and it gives the pack a machined, jewellery-like quality at almost no cost.
• 🎛️ White or Black, One Bottle: The samples show the same bottle with a white pump and a black pump, on three different body colours. The pump and the collar are the cheapest and fastest way to split a range: white reads fresh, clinical and clean; black reads premium, graphic and modern. The bottle does not change, so a variant costs a pump, not a tool.
• 🌰 Three Colourways Shown, Any Colour Custom: The samples show a translucent dark brown, a metallic champagne rose, and a translucent red. Note that these are two different finish families: a translucent gloss wall lets the formula's own colour show through, while a metallic or pearl finish makes the bottle itself the colour and softens reflections. Both are available on the same mould, and each hides or reveals different things — a pearl finish is far more forgiving of handling marks, and a translucent wall shows the fill level and the product.
• 🧩 Custom Size, Colour, Pump, Finish and Decoration: Every element is a variable: the capacity and section, the bottle colour and finish, the rib pattern, the pump type and output, the collar colour, the neck finish, and the decoration method. The 780 ml version shown is one specification in the range.
• 📐 Published Callouts Shown on the Sample: The image set calls out a 175 mm bottle height and a 69.2 mm width and depth on a 780 ML nominal fill. Those are the dimensions we produce to when they are the brief — and any other capacity or proportion is produced to your specification.
🎨 Appearance & Aesthetic Design: A Carved Square Block
The N118 Series is designed for brands whose packaging should look sculpted rather than printed — a bottle that carries its identity in its own surface.
• The Surface Is the Label: Most bottles carry the brand on a printed panel. This one carries it in the mould. The diagonal ribbing reads at an angle, changes with the light as the bottle is picked up and turned, and gives a plain coloured bottle a distinct silhouette in a photograph. That means the pack works with very little applied decoration — a mark and a line of copy is enough.
• Diagonal, Not Vertical: The ribs are cut on a diagonal sweep rather than vertically. Vertical ribbing reads as industrial and structural; a diagonal sweep reads as flowing and liquid, which is why the bottle looks like it is holding something poured rather than something pumped. It is a small design decision that changes the whole character.
• Gloss Translucent: The dark brown and red samples are glossy translucents — the highlight runs down the ribbing in a broken, stepped line instead of a single stripe, which turns the surface into a light effect. This is the finish that shows the formula's colour through the wall, and the reason a tinted bottle looks deeper and more saturated than an opaque one.
• Pearl and Metallic: The champagne rose sample is a metallic or pearl finish, which behaves completely differently: the surface diffuses the light instead of reflecting it, the colour is the bottle's own rather than the product's, and the ribbing reads as soft relief rather than as a hard highlight. It is also the most forgiving finish for fingerprints and handling marks.
• The Stepped Shoulder as a Transition: The terraced rings solve the hardest part of a square bottle — what happens where a round neck meets a square body. Instead of an abrupt blend, the shoulder steps down in rings, so the transition reads as a designed sequence and the eye is led into the body.
• White Pump, Black Pump, Two Different Products: The same bottle with a white pump reads as a clean daily care product; with a black pump it reads as a salon or treatment product. Because the collar and head are separate parts, a brand can run both from one bottle and one label design.
• On the Sample Artwork: The samples carry the QIYUE mark with a leaf icon, the lines "PREMIUM SKINCARE / Daily Care", and a small "PET Plastic / Factory Direct" note, used to demonstrate print capability across the moulded relief. Any mark, icon, or copy on the final pack is the brand's own and is produced to the brand's artwork.
🛠️ Technical Specifications
Precision-engineered for PET moulding with moulded relief, pump fitment, and high-volume filling lines.
Specification | Details
Product Type | 780 ml PET Pump Bottle — Square Bottle with Sculpted Diagonal Ribbing and Stepped Shoulder Capacity | 780 ML Nominal as Shown; Fill Level, Overflow Capacity and Recommended Headspace Confirmed on Sampling Bottle Height | 175 mm as Called Out on the Sample (Bottle Only; Total Height With the Pump Fitted Depends on the Pump Selected) Width | 69.2 mm as Called Out on the Sample Depth | 69.2 mm as Called Out on the Sample Section | Square, 69.2 x 69.2 mm as Called Out Material (Bottle) | PET as Specified Material (Pump) | Specified per Project Against the Pump Option Selected Colourways Shown | Translucent Dark Brown; Metallic Champagne Rose; Translucent Red Finish | Gloss Translucent and Metallic / Pearl as Shown; Further Finishes Available on Request Surface | Sculpted Diagonal Ribbing on the Front and Side Faces as Shown; Stepped Shoulder Rings as Shown; Alternative Patterns and Smooth Faces Available Faces | Four Flat Faces — Front, Back and Two Sides; Label, Print or Sleeve Applications per Project Pump | Lotion Pump in White and Black as Shown; Further Dispensing Options Available; Output per Stroke Specified per Project Neck Finish | Specified to the Pump Selected; Confirmed by Physical Fit Test on Sampling Dip Tube | Trimmed to the Bottle Base per Project Decoration | Print or Foil Applied Across the Moulded Relief, or Label on a Smooth Face; Process Selected per Project Custom Capacity & Size | Further Capacities, Heights and Sections Produced to Your Specification Custom Content | Brand Mark, Product Name, Variant Coding, Ingredient and Usage Panels, Barcode or QR, Batch and Date Fields, Multi-Language and Origin Copy MOQ | To be confirmed per project — confirm with your account manager Sampling | Pre-Production Sample Supplied for Approval Compliance Documents | To be confirmed per project and destination market
• Note: The 175 mm and 69.2 mm callouts describe the bottle itself; the total height with a pump fitted is greater and depends on the pump selected, and the working fill level is set with the dip tube length — both confirmed on sampling. The material breakdown of the pump shown on this sample set is not published, so the pump and collar material are specified per project rather than assumed. Printing across a moulded relief is a different process from printing on a flat face: we select the method against your artwork and proof it on production samples, because ink skipping at the rib edges is the failure mode to look for. Artwork, marks, icons, and copy shown are samples only and are replaced by your own.
🌈 Full Customization & OEM/ODM Services
Every element of this bottle is a specification you control — the samples are a demonstration, not a fixed product.
• Custom Pump Type and Output: A lotion pump in white or black as shown, plus other dispensing options including a foaming pump — with output per stroke set against your formula and your intended dose. Since the neck is unchanged, one bottle serves several product types.
• Custom Colour and Finish: Any colour in gloss, translucent, matte, frosted, pearl, or metallic, matched to your reference sample. Translucent and metallic finishes behave completely differently on the same moulded relief, so we proof both against your artwork and specify the formula colour alongside the bottle colour where the wall is translucent.
• Custom Relief and Shoulder: The diagonal rib pattern as shown, or a different pitch, a deeper or shallower relief, a vertical rib, a knurl, or a smooth face — plus the stepped shoulder rings as shown or a plain shoulder. Relief is cut into the mould, so it is a one-time decision per tool and worth deciding with the artwork in hand.
• Custom Capacity and Section: 780 ml as shown, plus other capacities on the same square language — a smaller companion size for a matched pair, or a taller version — so a range reads as one family with one pump specification and one label format.
• Custom Collar, Cap and Overcap: Collar colour and finish, in white, black, or a metallized finish; plain overcap, travel-lock, or a tamper-evident option quoted per project, since the overcap is what protects the head in transit on a 780 ml unit.
• Custom Decoration, Label and Carton: Print or foil across the relief, or a label on a smooth face; plus a matching box, insert, and outer carton from the same house, so the whole pack arrives matched and dimensioned for the actual bottle.
• MOQ and Range Economics: Minimums are quoted per project, depending on capacity, colour, finish, pump, and decoration. Where a range shares one bottle mould across several colours or pumps, ask your account manager how the quantities are counted.
🧴 Core Applications: The Specific Skincare Products This Bottle Is Built For
A 780 ml square bottle with a sculpted grip and a choice of pumps is a bulk, refill and professional format. The products below are the ones this exact specification — 780 ml, square section, ribbed surface, pump — is built for most often.
• Shampoo and Conditioner — Primary Application: 780 ml is the family size and the salon back-bar size. The pump is what makes a large shampoo usable at the basin, and the square section is what makes it pack densely in a salon case or a family bathroom.
• Hair Mask, Hair Treatment and Deep Conditioner: Thick, high-viscosity products that need a pump and a dip tube specified for the viscosity. A 780 ml pump bottle is the standard format for a treatment mask used repeatedly in a shower.
• Body Wash, Shower Gel and Bath Gel: The large-format shower product, where the ribbed surface gives grip with wet hands and the tinted translucent wall lets the gel's colour work on the shelf.
• Foaming Body Wash and Shower Foam: A foaming pump on the same bottle converts a 780 ml fill into a long-life foam product for a shower — an efficient concentrate-style format at a bulk size.
• Liquid Hand Wash and Hand Soap: A 780 ml refill or family size for hand wash, paired with a smaller dispenser bottle the customer refills — the format that anchors a refill programme.
• Body Lotion and Body Milk: Large family and professional sizes, where the pump dispenses a measured amount and the flat faces carry a full ingredient and usage panel.
• Refill and Refill-Station Formats: A 780 ml refill unit for a paired dispenser or a refill station, where the neck and the pump interface have to match the host dispenser — specified with your dispenser, not assumed.
• Salon, Clinic and Professional Back-Bar: Bulk working sizes for professional use, where durability, a reliable pump, and a large fill matter more than decoration.
• Hotel, Amenity and Hospitality Bulk: Large-volume formats for amenity refill systems and housekeeping programmes, where packing density and a straightforward label layout are the requirements.
• Scalp Care, Hair Tonic and Scalp Foam: Large pump formats for scalp treatments and tonics, where a targeted nozzle and a large fill suit repeat treatment use.
• Bath and Body Oils, Massage and Professional Body Care: Oil and high-value body products where the pump and the collar seal are specified against the formula rather than assumed.
• Cleansing Milk, Cleansing Lotion and Makeup Remover — Large Sizes: Professional and refill sizes for rinse-off cleansers, where a 780 ml fill is the working size in a spa or clinic.
• Baby Shampoo, Baby Wash and Baby Bath — Family Sizes: Large formats for family use, in a break-resistant PET bottle rather than glass.
• Exfoliating Wash and Body Scrub: Particle-carrying formulas dispensed from a pump when the pump and dip tube bore are specified for the particle size and viscosity — confirmed on a formula sample.
• Dog and Pet Shampoo — Adjacent: The same bottle and pump family, a growing adjacent use and a natural second line for a brand already running this format.
• Household and Home-Care Liquids — Adjacent: Large pump formats for body-adjacent liquids, where a square section and a large fill are the buying criteria.
💎 Why Choose Us as Your Custom Bottle Supplier?
• Moulding Relief on a Square PET Bottle: Cutting a diagonal rib into a blow-moulded square bottle is harder than it sounds — the material must fill the relief evenly along its whole length, the corners fill last and can end up with shallow or rounded ribs, and the flow lines can follow the ribs and read as grey streaks on a dark translucent wall. We control the mould finish, the blow-up, and the cooling so the relief is consistent across the face and around the corners, which is verified on production samples.
• Panel Stiffness on a Large Flat Face: A 780 ml square panel is the largest flat surface in this range, and it is the one most likely to flex or "oil-can" when the pump is pressed. The ribbing and the wall are specified together against that behaviour, so the bottle feels solid in the hand and a label on the smooth face stays down.
• Square Base Flatness and Corner Consistency: A tall square bottle is only stable if the base is flat and the four corners are equal — a deviation shows up as a rock on a shelf or a lean in a carton, and a customer notices it before they read anything. Flatness and squareness are checked on samples against the approved specification.
• Pearl and Metallic Finish Consistency: Pearl, metallic and soft-touch finishes are the most batch-sensitive surfaces in packaging — they can mottle, streak, or vary in sheen from run to run, and the difference is obvious when two bottles stand side by side. We hold the finish to an approved reference sample and proof it on the moulded relief, where light catches it unevenly by design.
• Translucent Colour Consistency Across a Range: A tinted translucent bottle is judged against the previous order and against its siblings in the range. We hold colour to approved reference samples so a reordered brown, red, or amber matches, and so a set of three variants looks like one family.
• Decoration Across a Moulded Relief: Printing or foiling across ribs is not the same as printing on a flat face — the ink or foil must conform to the relief or it skips at the edges, and the process changes depending on the depth and the pitch of the pattern. We select the process and test it against your artwork on the actual moulded surface, rather than quoting a standard print and discovering the limit on the first run.
• Pump Fit, Output and Leak Control: On a 780 ml bottle the pump works harder — longer dip tube, larger head pressure, more presses over the life of the fill — so priming, output consistency from full to empty, collar seal and shipping retention are all verified rather than assumed.
• Weight, Packing Density and Freight Economics: A square section is a freight decision as much as a design one. We help specify a wall and weight that hold the shape and the relief while keeping unit weight, carton fill, and landed cost where a bulk line needs them.
• Refill Compatibility: For refill and refill-station programmes, the neck, the pump, and the host dispenser have to work together. We develop the interface against your dispenser specification so the refill fits on the first attempt.
• Physical Sample Before Production: Every project is approved on a pre-production sample, so the section, relief definition, finish, colour, pump fit, output, dip tube, decoration, and marking are all confirmed on a real unit before mass production.
• One-Stop Bundle, One Quality Standard: Supplying the bottle, pump, label, and box from the same house removes the most common failure in this category — a pump or a label dimensioned for a bottle produced to a slightly different tolerance, which is what causes line stoppages and returns.
• 10+ Years of Cosmetic Packaging Expertise: Backed by 1,000+ mature mould sets and ISO9001 quality management, we have delivered integrated packaging solutions for over 10,000 global beauty brands — and the same engineering discipline is applied to the bottle, pump, and decoration programme.







