Contact me immediately if you encounter problems!

All Categories

Custom 450ml PETG Faceted Pump Bottle | Multi-Facet Polygonal Body, 161mm Height, 94.5mm Width, Thick-Wall Gloss Finish, Wide Flat Actuator, Any Colour | OEM Body Lotion, Body Wash & Hand Wash Packaging

📦 N125 Series: 450 ml PETG Multi-Facet Pump Bottle With a Wide Flat Actuator, for Body Lotion, Body Wash and Hand Wash

🌟 Product Highlights

• 🧪 100% One-Stop Integrated Solution: From the bottle and the pump to the label, the box, and the outer carton — our factory delivers the complete package from a single production line. On a faceted bottle this matters more than usual: the pump is matched to the neck, the decoration is planned around the facet edges, and the insert is cut for the actual foot — one supplier, one QC standard, one seamless handover.

• 💎 A Faceted Form, Not a Decorated Cylinder: This bottle is built out of flat planes — a large central face, angled side faces, and chamfered planes at the shoulder and the base. The silhouette is architectural rather than organic: a wide body that converges to a small platform at the neck and to a narrow foot at the base, so the bottle appears to lift off the shelf instead of sitting on it.

• 🏛️ PETG Is the Material That Allowing This Shape: PETG (glycol-modified PET) moulds with a heavier, glass-like wall and a deeper, harder gloss than standard PET, and it tolerates the sharp edges and thick sections that a faceted design needs without the stress whitening that shows up on thinner materials. It is the reason this bottle reads closer to ceramic or cut stone than to a plastic container — and it takes saturated and pearlescent tints, which is what gives the sample its solid, pigmented pink.

• 🔷 Facets Are Engineering as Well as Styling: On a blow-moulded bottle, flat planes are the hardest thing to hold: they want to bow outward under pressure and inward under vacuum, and a gloss surface shows every wave. Each facet edge acts as a stiffening rib, so a body made of several planes is more rigid than one large flat panel of the same wall thickness — the facets are a structural solution that happens to be the design.

• ✨ The Facets Change the Light: A cylinder returns one long continuous highlight, and any unevenness in the wall reads as a waver along that highlight. A faceted body splits the reflection into a series of small highlights and crisp edges, so the bottle reads as jewellery rather than as a smooth surface — and small handling marks and fingerprints are far less visible, which is a practical advantage in retail and in e-commerce photography.

• 🧴 450 ml — the Body-Care Working Size: 450 ml is where body lotion, body wash, hand wash, shampoo and conditioner actually live. It is a full retail size that a customer buys as their main product, and the wide, generous body at this fill is what gives the pack the presence of a premium item without moving to a 600–750 ml family size.

• ✋ A Wide, Flat Press Head: The sample is fitted with a broad flat actuator rather than a small round nozzle. That is a deliberate choice for body products: a palm press delivers a larger, more even dose for a lotion or a wash, it is easier to use with wet hands in a shower, and it turns the top of the pack into a design element rather than a mechanism.

• 🥣 A Narrow Foot Under a Wide Body: The base converges to a foot noticeably smaller than the widest point of the body. That does two things at once — it makes the bottle easy to grab and lift because the hand closes under the body, and it creates a shadow line under the pack so the bottle appears to float, which is the single most common trick in premium packaging photography.

• 🏷️ A Label Area That Is Genuinely Flat: The central face is a real plane, so a pressure-sensitive label lies down flat instead of conforming to a curve, the copy stays square to the edges, and the layout keeps its proportions in a photograph. It is the reason a 450 ml bottle can look designed rather than industrial.

• 🎨 Any Colour, Any Finish: The solid pink shown is one specification. PETG can be produced in any opaque colour, a pearl or metallic effect, a translucent tint, or a frosted, matte, satin or high-gloss finish matched to your reference, with the pump specified separately so a range can be colour-coded by variant or unified under one house colour.

• 🧩 Custom Size, Colour, Closure and Decoration: Capacity, facet geometry, wall colour and finish, pump type and output, neck finish, and decoration method are all variables. The 450 ml format shown is one specification in the range.

• 📐 Dimensions as Called Out on the Sample: The image set prints a 161 mm body height and a 94.5 mm overall width on a 450 ML nominal fill. Those are the dimensions we produce to when they are the brief; other capacities and proportions are produced to your specification.

🎨 Appearance & Aesthetic Design: A Cut-Gem Body in Solid Colour

The N125 Series is designed for brands that want a body-care pack to look substantial, architectural and expensive — without moving up to a bigger fill.

• The Silhouette Is a Cut Stone, Not a Bottle Shape: The shoulder converges steeply from the widest point to a small flat platform around the neck, the body drops in near-straight planes, and the base chamfers back in to a narrow foot. The result is a form with a top and a bottom that are both smaller than its middle — the geometry of a faceted gem, translated into a container.

• Planes, Not Curves: The eye reads the surface as a set of flat facets meeting at defined edges. Each edge is a hard line, and those hard lines are what give the pack its precision: a curve of the same volume would read softer, cheaper and less deliberate.

• Solid Colour With a Hard Gloss: The sample is an opaque, fully pigmented pink with a high-gloss finish — no transparency, no visible fill level, no distraction. On a faceted surface that gloss concentrates into bright planes and deep shadow planes side by side, which is what makes the colour look saturated rather than flat.

• A Toned Pump, Not a Contrast: The actuator and collar are specified in the same colour family as the body, so the pack reads as one object rather than a bottle with a fitting on top. Where a brand wants contrast, a metallized or black pump on the same neck changes the character of the whole pack at low cost.

• The Neck Platform: The wide flat shoulder terminates in a small platform around a short neck. That step is what allows a pump to sit visually "inside" the silhouette instead of on top of it — the bottle keeps its proportions even with the pump fitted.

• Depth and Facet Count: The views supplied show the front elevation only, so the number of facets around the body and the front-to-back depth are confirmed against your drawing or a plan-view sample before the specification is fixed.

• On the Sample Artwork: This image carries no brand mark or printed artwork — it is a plain structural render. Every mark, ingredient panel, and line of copy on the final pack is the brand's own.

🛠️ Technical Specifications

Precision-engineered for PETG moulding, pump fitment, and high-volume filling lines.

Specification | Details

Product Type | 450 ml PETG Pump Bottle — Multi-Facet Polygonal Body Supplied With a Press Pump Capacity | 450 ML Nominal as Shown; Fill Level, Overflow Capacity and Recommended Headspace Confirmed on Sampling Body Height | 161 mm as Called Out on the Sample (Bottle Body; Total Height With the Pump Fitted Is Greater) Overall Width | 94.5 mm as Called Out on the Sample (Widest Point of the Body) Depth | Not Supplied on This Sample — Confirmed Against Your Drawing or a Plan View Facet Geometry | Faceted Body With a Chamfered Shoulder, Angled Side Faces and a Chamfered Base; the Number of Facets Is Confirmed per Project Base | Narrow Foot, Smaller Than the Body's Widest Point Material (Bottle) | PETG as Specified for This Project Material (Pump) | Not Printed on This Sample; Specified per Project Against the Pump Option Selected Bottle Colour & Finish | Solid Opaque Pink as Shown; Any Opaque or Translucent Colour, Pearl or Metallic Effect, Gloss, Matte, Frosted or Satin Finish Matched to Your Reference Pump Colour | Matched to the Body as Shown; Any Colour and Finish per Specification Actuator | Wide Flat Press Head as Shown; Other Actuator Styles Available on the Same Pump Output per Stroke | Specified per Project — Confirmed Against Your Formula and the Pump Selected Neck Finish | Specified to the Pump Selected; Confirmed by Physical Fit Test on Sampling Dip Tube | Trimmed to the Bottle Base per Project Decoration | Pressure-Sensitive Label or Shaped Die-Cut Label on the Central Face, Hot Stamping or Silk Screen per Facet, Shrink Sleeve, or Direct Print Custom Capacity & Size | Further Capacities, Heights and Facet Geometries Produced to Your Specification Custom Content | Brand Mark, Product Name, Variant Coding, Ingredient and Usage Panels, Barcode or QR, Batch and Date Fields, Multi-Language and Origin Copy MOQ | To be confirmed per project — confirm with your account manager Sampling | Pre-Production Sample Supplied for Approval Compliance Documents | To be confirmed per project and destination market

• Note: The 161 mm callout describes the bottle body; the total height with the pump fitted is greater and depends on the pump selected, and the working fill level is set with the dip tube length — both confirmed on sampling. The 94.5 mm figure is the overall width at the widest point of the body as printed on the sample; the front-to-back depth and the number of facets are not shown on the views supplied, so both are confirmed against your drawing before the specification is fixed. The pump material, output per stroke and neck finish are not published on this sample, so they are specified per project rather than assumed. The bottle material is written as PETG per the project brief; please confirm whether the pack will carry a PET or a PETG material statement, because the two resins are described differently on pack.

🌈 Full Customization & OEM/ODM Services

Every element of this bottle is a specification you control — the samples are a demonstration, not a fixed product.

• Custom Pump and Actuator: Press pump as shown with a wide flat actuator, or a standard round actuator, a disk-top, or a lotion pump on the same neck — with output per stroke set against your formula and your intended dose. A large-dose actuator is usually the right call for a body lotion and an unnecessary cost on a hand wash.

• Custom Colour and Finish: Any opaque or translucent colour, in gloss, matte, frosted, satin, soft-touch, pearl or metallic, matched to your reference sample. On a thick-wall PETG body the finish decides the character of the pack more than the colour does: high gloss reads like ceramic, matte reads like stone, pearl reads like soft-touch cosmetics.

• Custom Capacity and Facet Geometry: 450 ml as shown, plus other capacities on the same faceted language — a 250 ml hand-wash size and a 600 ml family size in the same geometry, so a range reads as one family with one label format and one label position.

• Custom Decoration on a Faceted Surface: This is where a faceted bottle needs planning rather than assumption. A pressure-sensitive label will not conform to a sharp edge, so the options are a label sized to the central face only, a shaped die-cut label that stops short of the edges, or direct decoration — hot stamping or silk screen applied per facet, with registration set on the edges themselves.

• Custom Neck Finish: Set to the pump you have qualified, confirmed by physical fit test before production rather than by drawing alone, which is also what allows a brand to fit its own pump to our bottle.

• Custom Carton, Insert and Bundle: Order the bottle with its label, its box, its insert, and its outer carton from the same house, so the insert is cut for the actual narrow foot and the box is dimensioned for the actual widest point — a faceted body needs a cradle, not void fill.

• MOQ and Range Economics: Minimums are quoted per project, depending on capacity, colour, pump, and decoration. Where a range shares one bottle mould across several colours or closures, ask your account manager how the quantities are counted.

🧴 Core Applications: The Specific Skincare Products This Bottle Is Built For

A 450 ml faceted bottle with a wide press actuator is a body-and-hair-care format that is bought for its looks as much as its function. The products below are the ones this exact specification — 450 ml, PETG, faceted body, press pump — is built for most often.

• Body Lotion and Body Milk — Primary Application: The classic use. A large palm-press dose suits a lotion applied over the whole body, 450 ml is a mainstream retail fill, and the faceted body gives a body-care line the shelf presence of a premium product at a mainstream price point.

• Body Wash and Shower Gel: A shower format where a generous dose and a wet-hand-friendly actuator matter, and where an opaque tinted body lets the pack carry a strong colour story instead of showing the fill.

• Hand Wash and Liquid Hand Soap: A 450 ml pump on a basin or a kitchen counter — the wide body reads generous, the narrow foot fits a crowded ledge, and the flat central face carries a brand mark at a size that a smaller bottle cannot.

• Shampoo and Conditioner: A paired set in the same facet geometry, differentiated by label colour or pump finish — one mould covering both halves of a range, which is how a shampoo and conditioner pair is normally built.

• Hair Mask, Treatment and Scalp Care: A heavier, thicker product where the larger dose per press is an advantage, and where a 450 ml fill is a practical in-shower size.

• Body Scrub, Body Polish and Exfoliating Wash: A visible, textured product that suits an opaque body — the pack does not need to show the fill, so a saturated colour can carry the variant story.

• Bath Foam, Bubble Bath and Shower Cream: A larger-dose format for a product used by the capful, where the pump is a convenience and the 450 ml fill matches the usage rate.

• Sun Care, After-Sun and Body Moisturiser: A seasonal body-care pump where the pack has to look premium on a sun-care shelf and survive being carried in a beach bag.

• Massage Lotion, Body Oil and Body Butter Lotion: A generous-dose pump format for professional and retail body care, where a wide actuator gives a controlled, even delivery.

• Self-Tan Lotion and Gradual Tan: A body lotion format where the pack's premium appearance supports a higher price point and the opaque wall avoids showing the tinted fill.

• Baby Lotion and Baby Wash: A pump format for family use, where a break-resistant PETG body is safer than glass and a large dose is practical one-handed.

• Cleansing Oil, Cleansing Milk and Makeup Remover: A pump-dispensed 450 ml cleanser for a bathroom shelf, where the opaque faceted body keeps a practical bulk format looking designed.

• Hotel, Amenity and Refill Programmes: A 450 ml piece for amenity and refill dispensers, where an opaque, robust body suits repeated handling and the pack's appearance matters in the room.

• Salon and Back-Bar, Clinic and Professional: A pump size for professional use, where the pack has to look consistent with a retail line and survive daily handling.

• Pet Shampoo and Pet Coat Care — Adjacent: The same bottle and pump family at a size that suits animal care, and a natural second line for a brand already running this format.

• Home-Care and Hand-Soap Refill — Adjacent: A premium-looking pump format for household liquids, where the faceted body is the differentiator on a shelf of plain cylinders.

💎 Why Choose Us as Your Custom Bottle Supplier?

• Facet Edge Definition and Consistency: The edges are the design — a rounded corner where there should be a crease, or a crease that wanders along the body, is immediately visible at this wall thickness. We hold the facet lines and the edge definition across the run, because on a multi-plane body any inconsistency between units reads as a defect across a whole shelf.

• Gloss and Wall Evenness on Flat Planes: A high-gloss flat plane is the least forgiving surface in packaging: any waviness, sink mark or wall variation shows as a distortion in the reflected light. We control the parison, the blow-up and the cooling so each face reflects cleanly, and we inspect under directional light rather than under diffuse light, which is how a customer will see it.

• Wall Integrity at the Corners: Material thins where a facet meets another facet, and stress whitening at a sharp edge shows up as a pale line on a saturated colour — the most common failure mode of a faceted PETG body. We check wall distribution at the edges and confirm that the colour reads solid right up to the crease.

• PETG Material Handling and Surface Care: PETG gives the heavy, glass-like look, but its surface is softer than glass or acrylic and marks show on gloss. We specify packing that protects the faces — bagging, interleaving and carton layout — because a perfect bottle that arrives scuffed is a return, not a sale.

• Narrow-Foot Flatness and Stability: With a foot smaller than the body, stability depends on the flatness of a small contact ring. We check it on filled units, because a 450 ml bottle that rocks is unusable regardless of how good the facets look.

• Pump Fit, Seal and Dose on a Heavy Body: A full 450 ml bottle puts load on the collar gasket, and a wide actuator puts a lateral force on the stem. We fit-test the pump on the actual bottle, check seal integrity on filled units, and verify dose volume and priming with your fill.

• Decoration Across Facets: A label that bridges a crease will lift at the edge, and a print registration that drifts across a facet shows immediately. We plan the decoration against the actual facet layout — face-only label, shaped die-cut, or per-facet print — and approve it on a production sample rather than on a flat artwork.

• Colour and Pearl Consistency: On a thick opaque wall, colour drift between runs is obvious against the previous order and against a paired SKU, and a pearl or metallic finish is even harder to match. We hold colour to an approved physical reference sample, not to a screen value.

• Weight and Freight Balance: A thick PETG body carries more weight than a PET bottle of the same fill, which is part of what it is being bought for — but freight, breakage and carton strength still have to work. We help specify a wall that delivers the heft on the shelf without overshooting the landed cost a retail line can carry.

• Physical Sample Before Production: Every project is approved on a pre-production sample, so the facet geometry, edge definition, gloss, colour, pump fit, dose, foot flatness, and decoration are all confirmed on a real filled unit before mass production.

• One-Stop Bundle, One Quality Standard: Supplying the bottle, pump, label, and box from the same house removes the most common failure in this category — a pump, a label or an insert dimensioned for a bottle produced to a slightly different tolerance, which is what causes line stoppages and returns.

• 10+ Years of Cosmetic Packaging Expertise: Backed by 1,000+ mature mould sets and ISO9001 quality management, we have delivered integrated packaging solutions for over 10,000 global beauty brands — and the same engineering discipline is applied to the bottle, pump, and decoration programme.

N125详情页_01.jpgN125详情页_02.jpgN125详情页_03.jpgN125详情页_04.jpgN125详情页_05.jpg

Get a Free Quote

Our representative will contact you soon.
Email
WhatsApp
Company Name
Leave a message
0/1000
  • YES! Please send your logo in CDR format to us. MOQ is 10000pcs.(depend on bottle designs).
  • Yes, labels can be made.
  • . Silk printing, hot-stamping, UV Coating,Spray-coating. b.Custom body / caps color . c.Open mould service.
  • Samples usually take 7-10 days (if inventory is sufficient), custom designs normal 25-35 days (depend on your designs and bottle material).
  • Usually 5-7days by express. 30-35days by sea if big quantity.
  • MSDS + SGS +ISO
  • 2times quality checking by QC before shipping. (On production line+ packing team checking).
  • Packing process will be send to you before shipping for confirmation.
  • Via Alipay, western union, TT, Paypal.
  • Yes, but shipping cost need be repaied.
  • YES, MOQ is depend on cap designs.
  • Welcome any time, our factory is Guangzhou baiyun area.

Get a Free Quote

Our representative will contact you soon.
Email
WhatsApp
Company Name
Leave a message
0/1000
WhatsApp QR code for Qiyue Industry
custom 450ml petg faceted pump bottle multi facet polygonal body 161mm height 94 5mm width thick wall gloss finish wide flat actuator any colour oem body lotion body wash hand wash packaging-8

Get a Free Quote

Our representative will contact you soon.
Email
WhatsApp
Company Name
Leave a message
0/1000