📦 Series: 240 ml Clear PET Foam-Pump Bottle With a PP Overcap and an ABS Foam Pump, for Foaming Cleanser, Mousse and Hand Wash
🌟 Product Highlights
• 🧪 100% One-Stop Integrated Solution: From the bottle and the pump to the label, the box, and the outer carton — our factory delivers the complete package from a single production line. On a foam product this matters more than on most: the foam quality depends on the pump and the formula together, so having the bottle, the pump, and the label under one roof removes the argument about whose part is at fault. One supplier, one QC standard, one seamless handover.
• 🫧 Foam Changes the Economics of a Small Bottle: A foam pump draws air into the liquid and pushes out a measured volume of foam. The fill can therefore be a concentrate, and each dose dispenses far less liquid than a lotion pump would. A 240 ml foam bottle behaves like a much larger conventional bottle in daily use — which is exactly why the foam format is used to sell small sizes: a 240 ml cleanser reads as a full-size product, not a sample.
• 🚫 No Propellant, No Aerosol Can: Foam is produced mechanically, by the pump engine, not by a pressurised can and a propellant gas. The pack is a PET bottle, it is not pressurised, it is not flammable, and it ships by air and by post without the restrictions that apply to aerosols. For a mousse or a foam cleanser sold online and cross-border, that is a structural advantage, not a footnote.
• 💎 Clear Wall, Glass-Like Without the Glass: The sample is a fully transparent PET wall. The customer sees the fill level, the clarity, and the colour of the product itself — and once dispensed, the foam is the product's own texture on display. A clear wall also gives the impression of glass while keeping the weight and the break resistance of PET, which is what makes it viable for travel, amenity and e-commerce.
• 📏 57 mm Across, 110 mm of Body: A slim cylinder, not a wide one. At 240 ml this section keeps the bottle narrow enough to stand on a tight shelf, to fit a travel kit or an amenity tray, to sit in a cup holder, and to be gripped and pressed one-handed — while the height gives it the presence of a full-size product on a bathroom shelf.
• 🛡️ A Full Overcap, Not a Token Cap: The sample carries a tall translucent PP overcap that covers the whole pump head, not a shallow dust cover. This is the part that allows a pump bottle to travel: it stops the actuator being pressed in a bag or a parcel, contains any residue at the nozzle, and protects the head in transit — the difference between a pump bottle that survives e-commerce and one that arrives with product in the carton.
• 🏷️ Printed Material Breakdown — PP / ABS / PET: The sample prints the material of each part: overcap PP, pump ABS, external bottle PET. That is unusual on a product page and genuinely useful: it lets a brand state its material story accurately on its own listing, and it supports end-of-life sorting guidance (cap and pump separated from the bottle before recycling) rather than a vague recyclability claim.
• 🎛️ White on Clear — a Clinical, Neutral Aesthetic: White pump and collar against a transparent wall reads clean, medical-adjacent and honest — the visual language of a cleanser that shows you exactly what is inside. It is also the most forgiving combination for a brand that wants its own label colour to be the only colour in the pack.
• 🥣 Push-Up Base, Visible Through the Wall: The base is domed inward, with the recess visible through the clear plastic. On a transparent bottle this is both engineering and detail: the recess adds rigidity and resists base bulging under pressure, keeps the bottle standing flat, and gives the bottom of the pack something to look at instead of a plain disc.
• 🍶 240 ml — the Foam Category's Working Size: 240 ml sits where foam products actually live: facial cleansers, hand washes, mousses and travel formats. It is large enough to be a daily-use product and small enough to be a gift, a trial, a hotel amenity or a set component — one mould covering several commercial uses.
• 🎨 Any Colour, Any Finish: The clear version shown is one specification. The bottle can be produced in any opaque colour, any translucent tint, or a frosted, matte, gloss, satin or metallic finish matched to your reference, with the pump and the overcap specified separately so a range can be colour-coded by variant or unified under one house colour.
• 🧩 Custom Size, Colour, Closure and Decoration: Capacity, section, wall colour and finish, pump type and output, overcap style, neck finish, and decoration method are all variables. The 240 ml clear version shown is one specification in the range.
• 📐 Dimensions as Called Out on the Sample: The image set prints a 110 mm bottle height on a 240 ML nominal fill and a 57 mm diameter. Those are the dimensions we produce to when they are the brief; other capacities and proportions are produced to your specification.
🎨 Appearance & Aesthetic Design: A Clear Column With a White Head
The N124 Series is designed for brands whose product should look pure, clinical and honest — where the formula is the hero and the pack only has to frame it.
• The Silhouette Is Nearly a Straight Line: The wall runs almost vertical from the shoulder to the heel, with a short shoulder transition and a rounded base radius. That near-straight profile is what makes a small bottle read as a deliberate object: no bulge, no taper, nothing to distract from the fill.
• The Clear Wall Is the Design: On an opaque bottle the shape does the work. Here the product does. A tinted gel, a pearlescent wash, a milky micellar foam, or a two-phase liquid all read as graphic colour blocks through the wall — and the wall's own clarity becomes a quality signal in its own right. Clarity is unforgiving: any haze, flow line or wall-thickness variation shows immediately, which is why clear moulding is a stricter test of a supplier than opaque moulding.
• White on Clear: The pump, collar and overcap are white or near-white, so the top of the pack reads as one continuous cap rather than as an assembly of parts. The result is a clean two-colour object — clear and white — that photographs well and never fights a label.
• The Overcap Gives the Silhouette Its Cap: Because the overcap is tall and covers the whole pump head, the bottle reads as a closed capsule rather than a bottle with a mechanism on top. Remove it and the pump is revealed — a small, satisfying moment of unboxing that costs nothing.
• The Base Through the Wall: Clear PET means the push-up base, the dip tube and the pump's inner tube are all faintly visible. Some brands read that as transparency and engineering; it is worth designing the label with that in mind so the visible mechanism sits inside the artwork rather than beside it.
• On the Sample Artwork: These images carry no brand mark or printed artwork — they are structural renders only. Every mark, ingredient panel, and line of copy on the final pack is the brand's own.
🛠️ Technical Specifications
Precision-engineered for PET moulding, foam-pump fitment, and high-volume filling lines.
Specification | Details
Product Type | 240 ml PET Foam-Pump Bottle — Clear Slim Cylinder Supplied With a Foam Pump and an Overcap Capacity | 240 ML Nominal as Shown; Fill Level, Overflow Capacity and Recommended Headspace Confirmed on Sampling Bottle Height | 110 mm as Called Out on the Sample (Bottle Body; Total Height With the Pump and Overcap Fitted Is Greater) Diameter | 57 mm as Called Out on the Sample Wall Circumference | Approx. 179 mm — Derived From the Printed 57 mm Diameter, Not a Printed Callout Section | Round Cylinder; Near-Straight Wall With a Rounded Heel and an Inward (Push-Up) Base Material (Bottle) | PET as Printed on the Sample Material (Pump) | ABS as Printed on the Sample Material (Overcap) | PP as Printed on the Sample Material (Dip Tube) | Not Printed on the Sample; Specified per Project Bottle Colour & Finish | Clear (Transparent) as Shown; Any Opaque or Translucent Colour, Gloss, Matte, Frosted, Satin or Metallic Finish Matched to Your Reference Pump & Overcap Colour | White as Shown; Any Colour and Finish per Specification Pump Type | Foam Pump as Confirmed for This Project — the Sample Artwork Labels the Fitting "Lotion Pump"; the Specification Is Set by the Pump Actually Selected Output per Stroke | Specified per Project — Confirmed Against Your Formula and the Pump Selected Foam Performance | Engine- and Formula-Dependent (Surfactant System, Viscosity, pH); Verified on Filled Samples With Your Product Neck Finish | Specified to the Pump Selected; Confirmed by Physical Fit Test on Sampling Dip Tube | Trimmed to the Bottle Base per Project Decoration | Pressure-Sensitive Label, Shrink Sleeve, Full-Wrap Label or Direct Print; On a Clear Wall, Clear-on-Clear and Frosted Substrates Both Apply Custom Capacity & Size | Further Capacities, Heights and Diameters Produced to Your Specification Custom Content | Brand Mark, Product Name, Variant Coding, Ingredient and Usage Panels, Barcode or QR, Batch and Date Fields, Multi-Language and Origin Copy MOQ | To be confirmed per project — confirm with your account manager Sampling | Pre-Production Sample Supplied for Approval Compliance Documents | To be confirmed per project and destination market
• Note: The 110 mm callout describes the bottle body only; the total height with the pump and the overcap fitted is greater and depends on the parts selected, and the working fill level is set with the dip tube length — both confirmed on sampling. The 179 mm circumference is derived from the printed diameter, not a printed figure, and is shown as a working reference for label dimensioning. Pump output, neck finish and bottle weight are not published on this sample, so they are specified per project rather than assumed. The sample artwork labels the fitting "lotion pump" while the project specification is a foam pump; a foam pump is what this copy describes, and the parts are confirmed against the pump actually selected for production.
🌈 Full Customization & OEM/ODM Services
Every element of this bottle is a specification you control — the samples are a demonstration, not a fixed product.
• Custom Pump: Foam pump as the primary specification, with output per stroke and air-to-liquid ratio set against your formula and your intended foam texture. Other pump types on the same neck are available on request where a lotion or treatment format is planned in the same silhouette.
• Custom Colour and Finish: Any opaque or translucent colour, in gloss, matte, frosted, satin, soft-touch or metallic, matched to your reference sample. On a clear bottle we ask for the formula colour alongside the bottle colour and specify the two together, because the wall shows both.
• Custom Overcap: Tall translucent PP overcap as shown, an opaque overcap, a metallized overcap, or a shallow cap for retail formats sold in an outer carton — the choice is usually decided by whether the bottle ships on its own or inside a box.
• Custom Capacity and Section: 240 ml as shown, plus other capacities on the same slim language — a 150 ml travel size and a 300 ml family size in the same silhouette, so a range reads as one family with one label format and one pump specification.
• Custom Label, Sleeve and Print: Pressure-sensitive label, shrink sleeve, full-wrap label, or direct print. On a 57 mm cylinder the printable width is narrow, so copy length and font size are planned at artwork stage — the circumference is short and a long ingredient list has to be worked, not squeezed.
• Custom Neck Finish: Set to the pump you have qualified, confirmed by physical fit test before production rather than by drawing alone, which is also what allows a brand to fit its own pump to our bottle.
• Custom Carton, Insert and Bundle: Order the bottle with its label, its box, its insert, and its outer carton from the same house, so the label is cut for the actual diameter and the insert is cut for the actual base — a slim cylinder nests into a die-cut tray with a dedicated hole rather than void fill.
• MOQ and Range Economics: Minimums are quoted per project, depending on capacity, colour, pump, overcap, and decoration. Where a range shares one bottle mould across several colours or closures, ask your account manager how the quantities are counted.
🧴 Core Applications: The Specific Skincare Products This Bottle Is Built For
A 240 ml clear cylinder with a foam pump is a foam-specific dispensing format. The products below are the ones this exact specification — 240 ml, 57 mm, clear wall, foam pump — is built for most often.
• Foaming Facial Cleanser — Primary Application: The classic use of this size and format. A gel or liquid cleanser becomes a dense foam on dispensing, which spreads over the face without rubbing, rinses faster, and lets a brand sell a mild, low-surfactant formula with a luxurious texture. 240 ml is the standard retail fill.
• Cleansing Foam and Makeup-Remover Foam: A foam pump turns a micellar or oil-based remover into a foam that lifts makeup without tugging the skin. The clear wall lets a two-phase or tinted remover read as a product rather than a liquid.
• Foam Hand Wash and Foaming Hand Soap: A 240 ml foam hand wash on a basin is the premium end of the category — the foam is the experience, and the clear bottle fits a narrow ledge where a round dispenser would not.
• Shaving Foam and Shaving Gel-to-Foam: A non-aerosol shaving foam in PET — the format that avoids pressurised containers entirely, which matters for air freight and for brands making a "no propellant" claim.
• Body Wash Foam and Shower Foam: A lighter, airier body cleanser format, often sold as a premium or sensitive-skin line where a rich lather is undesirable.
• Baby Foam Wash, Baby Shampoo and Baby Cleanser: A gentle foam that does not need rubbing in, in a break-resistant clear bottle — one of the most consistent uses of this format, and one where "no aerosol" and "no propellant" are genuine purchase arguments.
• Intimate Wash and Feminine Foam Cleanser: A mild foam cleanser where measured dosing and a clean, transparent pack are part of the category's expected language.
• Scalp Care, Scalp Foam and Hair-Loss Treatment Foam: Foam formats are used for scalp treatments because the foam reaches the scalp through hair without saturating it — a targeted format at a convenient fill.
• Hair Styling Mousse and Curl Foam: A non-aerosol mousse for curl definition or volume, alcohol-free if required, in a bottle that ships without dangerous-goods restrictions.
• Self-Tan Mousse and Gradual Tan Foam: A foam format for even application, where a tinted foam is visible on the skin and the clear bottle shows how much remains.
• Cleansing Foam for Sensitive and Clinical Lines: Pharmacy, dermo-cosmetic and post-procedure lines favour foam because it minimises mechanical rubbing, and favour clear or white packs because they signal clinical honesty.
• After-Sun Foam, Cooling Foam and Leg-Foam: Light, spreadable foam formats for body care, where the 240 ml fill suits a seasonal or travel set.
• Travel, Amenity, Trial and Gift Sizes: A 240 ml piece for amenity programmes, travel kits, discovery sets and gift-with-purchase — the overcap makes it transport-safe and the slim section packs tightly into a tray or a case.
• Hand Sanitiser Foam — Adjacent: Foaming sanitisers in a non-pressurised clear bottle, where the foam reduces the run-off that gels can have.
• Pet Foam Shampoo and Pet Paw Foam — Adjacent: A no-rinse or rinse-light foam for animals, where a measured foam dose and a break-resistant bottle are the buying criteria.
• Household Foam Cleaners — Adjacent: Foam dispensing for surface and fabric cleaners, where a concentrate fill and a small bottle are the commercial logic.
💎 Why Choose Us as Your Custom Bottle Supplier?
• Foam Quality, Held Across the Run: Foam is the product here, and the foam is made by the pump engine from your formula. We verify dose volume, foam density and how the foam collapses on the skin, and we test against your actual fill rather than a substitute — because a foam that works in a sample and fails in production is a recall, not a complaint.
• Clear-Wall Moulding Quality: A transparent wall shows everything: haze, flow lines, wall-thickness variation, sink marks at the neck, and unevenness at the base. We control the parison, the blow-up and the cooling so the wall reads even and bright, and we inspect clarity under light — the standard for clear PET is stricter than for opaque, and it is the standard we hold.
• Push-Up Base Flatness: The recessed base is what keeps a slim bottle standing square instead of rocking on a wet shelf. We check the flatness of the outer rim and the concentricity of the recess, because on a narrow 57 mm footprint an off-centre base shows up immediately.
• Thread Fit and Seal on a Slim Neck: The closure is a separate part, so thread fit decides whether the pack leaks in transit or weeps at the collar. We fit-test the pump on the actual bottle and check seal integrity on filled units, including the collar gasket under the load of a full bottle.
• Overcap Retention and Head Clearance: An overcap is only useful if it stays on and clears the actuator through a drop. We check retention force, head clearance, and how the cap behaves after a transit drop, because that is where a pump bottle fails in e-commerce.
• Dip Tube and Low-Fill Draw-Off: On a 240 ml fill the last few millilitres matter proportionally more, so we verify priming, output consistency, and how much remains when the pump stops drawing, and trim the dip tube to suit the base geometry.
• Concentrate Compatibility: A foam fill is often a concentrate with a specific surfactant system, viscosity and pH. We confirm that the pump engine suits that system before tooling and decoration are committed, rather than discovering it at the filling line.
• Label Registration on a Narrow Cylinder: A 179 mm circumference leaves little room, and a wrap seam that lands on the front face ruins a clean design. We plan the seam onto the back or a narrow register and specify the substrate for a clear wall, including clear-on-clear and frosted options.
• Weight, Breakage and Freight Economics: PET gives a light, break-resistant pack for retail, travel and e-commerce, and a 57 mm cylinder packs tightly into a case. We help specify a wall and weight that hold shape and clarity while keeping landed cost where a foam line needs it.
• Physical Sample Before Production: Every project is approved on a pre-production sample, so the section, wall clarity, base, colour, pump fit, foam quality, overcap retention, dip tube, and decoration are all confirmed on a real filled unit before mass production.
• One-Stop Bundle, One Quality Standard: Supplying the bottle, pump, overcap, label, and box from the same house removes the most common failure in this category — a pump or a label dimensioned for a bottle produced to a slightly different tolerance, which is what causes line stoppages and returns.
• 10+ Years of Cosmetic Packaging Expertise: Backed by 1,000+ mature mould sets and ISO9001 quality management, we have delivered integrated packaging solutions for over 10,000 global beauty brands — and the same engineering discipline is applied to the bottle, pump, and decoration programme.





